60-micron opaque green PE silicone coated release film is a type of release liner that is mainly used in the production of

adhesive products such as tapes, labels, and other types of coated materials.

Some of the most common applications of 60-micron opaque green PE silicone coated release film include:

1. Label Industry:

The release liner is widely used in the label industry as a backing material for self-adhesive labels for various applications such as food

and beverage labeling, packaging, and industrial labeling. The green color of the film provides visual appeal and differentiation.

2. Graphics Industry:

The release liner is used in the graphics industry for creating vinyl graphics, cut lettering, and decals.

The green color of the film enables the user to easily identify the liner from the adhesive side.

3. Electrical and Electronic Industry:

The release liner is used in the electrical and electronic industry to create protective tapes and insulating materials.

The thickness and rigidity of the film enable it to handle the stress placed on it during the manufacturing and application process.

4. Medical Industry:

The release liner is used in the medical industry to produce wound dressings and other advanced wound care products.

5. Automotive Industry:

The release liner is used in the automotive industry to create double-sided tapes for attaching body trims, molding, and other automotive parts.

In summary, 60 micron opaque green PE silicone coated release film is commonly used in applications that require a medium-thin and flexible release liner. The green color of the film provides visual appeal and helps in product differentiation.

Coating silicone on the surface of PE film involves a multi-step process that includes the following:

1. Preparation of the film:

The first step is to prepare the surface of the PE film to ensure good adhesion of the silicone coating. The film may need to be cleaned and

treated with corona discharge or plasma to enhance its surface energy.

2. Application of silicone:

The silicone can be applied to the surface of the film using a wide range of methods, including spraying, dipping, or roll coating.

A silicone solution is prepared with a specific level of viscosity and concentration so it can be applied evenly to the film.

3. Curing of silicone:

Once the silicone has been applied to the film, it needs time to cure. Most commonly curing is done at a high temperature, typically above

120°C to allow uniform curing for better curing as well as adhesion to the PE substrate.

4. Trimming or die-cutting:

After the coating is cured, the coated PE film is trimmed to the correct size or cut into the desired shape using specialized equipment.

UV curing method is becoming increasingly popular for silicone coating on PE film in recent years. The UV curing method involves the use of

UV light to initiate a chemical reaction in the silicone, which then causes it to cure and crosslink. In contrast to the heat curing method, the UV-

curing process uses light waves in the ultraviolet spectrum rather than heat.

There are some advantages to using UV curing as a method to cure silicone on PE film:

1. Faster curing time:

The UV curing method is generally faster than the heat curing method and can often cure the silicone coating in just a few seconds.

2. Energy-efficient and eco-friendly:

Since UV curing does not require high heat temperatures, it is a more energy-efficient process and has a lower carbon footprint which

makes it an eco-friendly option.

3. High-quality coating:

UV curing results in a uniform and high-quality silicone coating with excellent adhesion and chemical resistance.

4. Lesser production time:

Compared to heat curing, the UV curing process can save time, resulting in faster production times.

5. No heat damage:

UV curing on PE film does not result in any heat damage, which ensures that the substrate's properties remain intact in the production process.

The specified stripping ratio of both sides of PE film can be controlled by regulating the coating weight of the silicone coating on each side of the

film. The stripping ratio is defined as the force required to remove the silicone-coated release liner from an adhesive and is expressed numerically

as a ratio.

Here are some steps to control the specified release ratio of both sides of PE film:

1. Determine the required release ratio:

The first step is to determine the desired release ratio for each side of the PE film. This will depend on the specific application requirements.

2. Adjust the coating weight of each side:

The next step is to adjust the coating weight of the silicone on each side of the PE film.

The coating weight will determine the thickness of the silicone coating and, therefore, the release ratio.

3. Conduct testing:

Once the coating weight has been adjusted, the release ratio needs to be tested on each side of the PE film.

The use of a tensile tester or a release force tester can help measure the force required to remove the silicone coated release liner from

the adhesive.

4. Adjust coating weight as needed:

If the release ratio does not meet the specified requirements, the coating weight on each side of the PE film needs to be adjusted accordingly.

This adjustment process may need to be repeated until the desired release ratio is achieved.

It is essential to establish a clear plan or coating process parameter to control the symmetrical release ratio.

This process involves finding the optimal settings for silicone wetting and adhesion on simple process setup steps.

The amount of silicone coating applied, the temperature used, as well as the solvent system used can all be regulated to control the specified

release level or release ratio of both sides of PE film.

       In 2016, HSF Materials Technology Co., Ltd. became a national high-tech enterprise specializing in the research

       and development, production, and sales of PE and PP polymer materials. The headquarters is located in Changjing

       Industrial Park, Jiangyin City, Jiangsu Province, with more than 100 employees and multiple production lines and

       equipment for PE and PP materials. From 2022 to Nov. 2023, HSF Materials Technology Co., Ltd. has completed the

       preliminary construction of an industrial cluster integrating blow molding, casting, film coating, and laminating through

       investment or equity participation, and its products cover various industries such as labels, packaging, electronics,

       building materials, and medical. In August 2023, a subsidiary was established in Shanghai as a sole import and export t

       rade window, dedicated to meeting the business needs of overseas customers.

       HSF believes that Honor is Shaped from Fulfillment, both for individuals and companies.

       By Hearkening to the voices of customers and Shaping their expectations, therefore we will make results Fabulous.

       Pre-sales consulting:

       To ensure minimum errors at the initial stages, it is imperative to fully comprehend the

       customers' most pressing needs and concerns, and completely eliminate all probabilities of mistakes.

       Accordingly, we strive to discern all aspects of product requirements and application scenarios

       that customers desire, whenever the situation arises.

      - Fully understand the requirements, usage environment, scenarios,

        and other important factors, and provide customized solutions.

      - Provide a comprehensive product quotation sheet for customers to have a clear understanding.

       Sales follow-up:

      - Provide real-time updates on production and delivery status to customers.

      - In a timely and proactive manner, confirm with customers the notes and other

        requirements in the documentation, in order to avoid unnecessary detention of goods at the destination.

      - Regularly update the movement status of goods on the designated transportation mode to ensure a one-stop service experience.

       Post-sales service:

      - Apart from malicious complaints, we humbly accept any effective suggestions for improvement.

        HSF consistently strives for continuous improvement in product and service quality, as we believe that honor is shaped from fulfillment.

      - Apr. 2016

        Established in Wuxi City, Jiangsu Province

      - Sep. 2019

        Invested in and become shareholder of Coating plants

      - Nov. 2020

        Invested in and become shareholder of TPU plant

      - Sep. 2021

        Merged a laminating plant

      - Jul. 2023

        Set up an independently operated Shanghai HSF Materials Technology Co.,Ltd as the only window for import & export business.

      * Total of 8 currencies are available to pick up in export sales activity. 

        USD, EUR, AUD, GBP, CAD, HKD, JPY, SGD, CNY

       The group may be small in size, but its core strength lies in the power of its tightly clenched fist.

       HSF boasts extensive knowledge of polymer membranes, backed by both theoretical and practical expertise.

       The team comprises over 10 individuals, including industry veterans with 20-40 years of experience in

       technology research and development, craftsmanship, and field operations. Adding to the mix are 5 technical

       sales teams that offer round-the-clock service, ensuring customers are fully supported. Our sales staff is prompt,

       professional, and passionate, always on standby to address any concerns you may have no matter the time or place.

      - 1. Production line personnel: 40 people

      - 2. Quality assurance & Quality control: 6 people

      - 3. Engineers in production and R & D: 8 people

      - 4. Sales: 4 people

      - 5. Administration: 5 people